[postfix-users] Konflikt wegen no_address_mappings

[Robert Schetterer]

Am 15.07.2012 14:35, schrieb Patrick Westenberg:
> Hallo nochmal,
> 
> nachdem meine canonical_maps nun funktionieren habe ich leider ein
> anderes Problem feststellen müssen.
> 
> Amavis erkennt die Adresse bzw. den User nicht weil die Adresse zu
> diesem Zeitpunkt wegen receive_override_options=no_address_mappings
> noch nicht umgeschrieben wurde.
> 
> Ohne den Eintrag habe ich aber doppelte Zustellungen.
> 
> Kann ich diesen Konflikt irgendwie auflösen?
> 
> Gruß
> Patrick Westenberg
> 
> 
> 
> smtp      inet  n       -       -       -       40       smtpd
>    -o receive_override_options=no_address_mappings
>    -o smtpd_proxy_filter=127.0.0.1:10024
> #   -o smtpd_proxy_filter=amavisd:[127.0.0.1]:10024
> #   -o smtpd_authorized_xforward_hosts=127.0.0.1
> #   -o smtpd_authorized_xclient_hosts=127.0.0.1
> 
> #submission inet n       -       -       -       -       smtpd
> #  -o smtpd_tls_security_level=encrypt
> #  -o smtpd_sasl_auth_enable=yes
> #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
> #  -o milter_macro_daemon_name=ORIGINATING
> #smtps     inet  n       -       -       -       -       smtpd
> #  -o smtpd_tls_wrappermode=yes
> #  -o smtpd_sasl_auth_enable=yes
> #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
> #  -o milter_macro_daemon_name=ORIGINATING
> #628      inet  n       -       -       -       -       qmqpd
> pickup    fifo  n       -       -       60      1       pickup
> cleanup   unix  n       -       -       -       0       cleanup
> qmgr      fifo  n       -       n       300     1       qmgr
> #qmgr     fifo  n       -       -       300     1       oqmgr
> tlsmgr    unix  -       -       -       1000?   1       tlsmgr
> rewrite   unix  -       -       -       -       -       trivial-rewrite
> bounce    unix  -       -       -       -       0       bounce
> defer     unix  -       -       -       -       0       bounce
> trace     unix  -       -       -       -       0       bounce
> verify    unix  -       -       -       -       1       verify
> flush     unix  n       -       -       1000?   0       flush
> proxymap  unix  -       -       n       -       -       proxymap
> proxywrite unix -       -       n       -       1       proxymap
> smtp      unix  -       -       -       -       -       smtp
> # When relaying mail as backup MX, disable fallback_relay to avoid MX loops
> relay     unix  -       -       -       -       -       smtp
>         -o smtp_fallback_relay=
> #       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
> showq     unix  n       -       -       -       -       showq
> error     unix  -       -       -       -       -       error
> retry     unix  -       -       -       -       -       error
> discard   unix  -       -       -       -       -       discard
> local     unix  -       n       n       -       -       local
> virtual   unix  -       n       n       -       -       virtual
> lmtp      unix  -       -       -       -       -       lmtp
> anvil     unix  -       -       -       -       1       anvil
> scache    unix  -       -       -       -       1       scache
> #
> # ====================================================================
> # Interfaces to non-Postfix software. Be sure to examine the manual
> # pages of the non-Postfix software to find out what options it wants.
> #
> #
> # Many of the following services use the Postfix pipe(8) delivery
> # agent.  See the pipe(8) man page for information about ${recipient}
> # and other message envelope options.
> # ====================================================================
> #
> # maildrop. See the Postfix MAILDROP_README file for details.
> # Also specify in main.cf: maildrop_destination_recipient_limit=1
> #
> maildrop  unix  -       n       n       -       -       pipe
>   flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
> #
> # See the Postfix UUCP_README file for configuration details.
> #
> uucp      unix  -       n       n       -       -       pipe
>   flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail
> ($recipient)
> #
> # Other external delivery methods.
> #
> ifmail    unix  -       n       n       -       -       pipe
>   flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
> bsmtp     unix  -       n       n       -       -       pipe
>   flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender
> $recipient
> scalemail-backend unix  -       n       n       -       2       pipe
>   flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
> ${nexthop} ${user} ${extension}
> mailman   unix  -       n       n       -       -       pipe
>   flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
>   ${nexthop} ${user}
> 
> 127.0.0.1:10025 inet n - n - - smtpd
>  -o content_filter=
>  -o smtpd_proxy_filter=
> 
> amavisd   unix  -       -       -       -       10      lmtp
>      -o lmtp_data_done_timeout=1200
>      -o lmtp_send_xforward_command=yes
>      -o disable_dns_lookups=yes
>      -o max_use=20
> _______________________________________________
> postfix-users mailing list
> postfix-users at de.postfix.org
> http://de.postfix.org/cgi-bin/mailman/listinfo/postfix-users

hier steht dazu was aehnliches

http://www.mail-archive.com/amavis-user@lists.sourceforge.net/msg01234.html

die Loesung koennten 2 cleanup instanzen sein

schuss ins blaue warum amavis nicht als milter

http://amavisd-milter.sourceforge.net/amavisd-milter.html

oder evtl mal das ganze layout ueberdenken

wozu brauchst du eigentlich
canonical_maps, evtl erreichst du ja dein Ziel auch anders

-- 
Best Regards
MfG Robert Schetterer